HT Ignition Cable Wires High Tension

We are the manufacturers, suppliers and exporters for high voltage ignition cable wire for boilers, burners, heaters, furnaces, ovens. From the simple copper wire with connector to more complex cable with carbon fibre conductor, connector and moulded protections. The high voltage ignition cables with resistive conductor in carbon fibre and semi conductive rubber are used for shielding electromagnetic disturbances. Usually used for Boilers, Burners, Furnaces, Ovens, Incinerators and Kilns. These high voltage ignition cable cores are recommended for use for inside wiring in the case of raised ambient temperatures under sufficient ventilation and small mechanical stress. It’s UV–Ultra Violet weather resistant but should be used in outside areas only with mechanical protection.

Tear Resistant Ignition Transformers HT Cables Silicon Ignition Cable, Insulation Copper Cable 1×1. Min. bending radius 6 x cable diameter for fixed installation 15 x cable diameter for flexible applications. Diameter 7 mm, 4.7 mm, Volt: 20 kV EI 2, Temp: (-) 50° C to 180° C, Available in length or by meter

×